Installation of Burning tool drivers

       USBCloner for Linux and Windows  For Linux use USBCloner and you do not need to install the Drivers  win 7 as an example Windows You need to install the Drivers in two steps
       USBCloner provides Driver without Microsoft Signature

Installation steps

     First connect the boar, then enter the boot mode then Windows will prompt to install the Drivers and you need to enter Device Manager and install the drivers manually.

en-devices1.png

 

           Right click“Scan for hardware changes”as shown

en-devices2.png

   

             Choose“Browse my computer for driver software”

en-devices3.png

            

                Click“Let me pick fromm a list of device drivers on my computer”

         

                  Next“Click“Have Disk”

en-devices5.png

          

                       Then Click“Browse”, select the directory with the drivers “usb_cloner_device.inf”

en-devices6.png

           

                   Click“OK”The driver in win7 system requires a digital signature but can be ignored, direct Next, select the Always install. Check again   PC device manager exclamation mark disappears the installation was successful, as shown:

en-devices7.png

USBCloner烧录工具驱动安装文档下载

 

驱动安装视频